Skip to main content

Calculadora de Moqueta Gratis

Calcula la moqueta en yardas cuadradas y metros lineales de rollo, además del acolchado. Gratis, rápido y funciona por completo en tu navegador sin necesidad de registro.

Actualizado

New

Carpet quantity

Extra material for cuts, spillage and breakage.

Carpet needed

22.00

square yards

Floor area
180ft²
Linear feet off the roll
16.5ft
Padding
20.00square yards

How this is calculated

square yards = (area + waste) ÷ 9; linear feet = (area + waste) ÷ roll width

  • Carpet is sold by the square yard, which is 9 ft².
  • Broadloom comes off a fixed-width roll, so a room narrower than the roll still consumes the full width — the linear-feet figure is what you are actually billed for.
  • Seam placement and pile direction can push real usage above this; a fitter measuring on site will confirm.
  • Padding is quoted at bare floor area, without the waste factor.

Preguntas Frecuentes

How does the Carpet Calculator work?

It applies the formula square yards = (area + waste) ÷ 9; linear feet = (area + waste) ÷ roll width. Enter your measurements and the result updates instantly in your browser — nothing is uploaded and no sign-up is needed.

Why should I include a waste allowance?

Offcuts, spillage, breakage and an uneven sub-base all consume material that the raw geometry does not account for. The default allowance is deliberately modest; increase it for complex layouts, and remember that running short usually costs more in a second delivery than the surplus did.

Are the results exact?

They are a close estimate, not a guarantee. Carpet is sold by the square yard, which is 9 ft². Real materials vary by supplier, moisture content and compaction, so confirm the rate with your supplier before placing a large order.

Is this tool free?

Yes, completely free with no registration. All calculations happen client-side in your browser.

Does it work on mobile?

Yes. The calculator is fully responsive and works on phones and tablets in any modern browser — useful when you are measuring on site.

About the Carpet Calculator

The Carpet Calculator converts a room into the square yards carpet is priced by, and the linear feet you are actually billed for off a fixed-width roll. Enter your measurements and the result updates as you type — there is nothing to submit and nothing to wait for.

Everything runs in your browser. Nothing you enter is sent to a server, there is no sign-up, and there is no usage limit.

Who it's for

Anyone pricing a carpet job before calling a fitter.

How the calculation works

square yards = (area + waste) ÷ 9; linear feet = (area + waste) ÷ roll width

The result depends on a few standard constants, which are stated on the page rather than hidden:

  • Carpet is sold by the square yard, which is 9 ft².
  • Broadloom comes off a fixed-width roll, so a room narrower than the roll still consumes the full width — the linear-feet figure is what you are actually billed for.
  • Seam placement and pile direction can push real usage above this; a fitter measuring on site will confirm.
  • Padding is quoted at bare floor area, without the waste factor.

Getting an accurate estimate

Measure twice. Small errors in a linear dimension compound, because material volume scales with two or three of them at once — a 6-inch error across a 20-foot run is over a cubic foot of material on a 4-inch pour.

Keep the waste allowance. The default is deliberately conservative: offcuts, spillage, uneven sub-base and breakage are all real, and running short mid-job usually costs more in a second delivery than the surplus did.

Round up when you order. Suppliers sell in fixed increments — quarter yards, whole bags, full boxes — so treat the figure here as the minimum you need rather than the exact amount to buy.