Skip to main content

Calculadora de Hormigón Gratis

Calcula cuánto hormigón necesita una losa en yardas cúbicas, pies cúbicos y sacos de 60 u 80 lb. Gratis, rápido y funciona por completo en tu navegador sin necesidad de registro.

Actualizado

New

Concrete slab

Extra material for cuts, spillage and breakage.

Concrete needed

1.36

cubic yards

Volume
36.7cubic feet
80 lb bagsEach yields ~0.60 ft³
62bags
60 lb bagsEach yields ~0.45 ft³
82bags

How this is calculated

volume ft³ = length × width × (thickness ÷ 12); cubic yards = ft³ ÷ 27

  • An 80 lb bag of pre-mixed concrete yields about 0.60 ft³; a 60 lb bag about 0.45 ft³.
  • Bag counts are rounded up — you cannot buy part of a bag.
  • Ready-mix is usually sold in ¼-yard increments, so round the cubic-yard figure up when ordering.

Preguntas Frecuentes

How does the Concrete Calculator work?

It applies the formula volume ft³ = length × width × (thickness ÷ 12); cubic yards = ft³ ÷ 27. Enter your measurements and the result updates instantly in your browser — nothing is uploaded and no sign-up is needed.

Why should I include a waste allowance?

Offcuts, spillage, breakage and an uneven sub-base all consume material that the raw geometry does not account for. The default allowance is deliberately modest; increase it for complex layouts, and remember that running short usually costs more in a second delivery than the surplus did.

Are the results exact?

They are a close estimate, not a guarantee. An 80 lb bag of pre-mixed concrete yields about 0.60 ft³; a 60 lb bag about 0.45 ft³. Real materials vary by supplier, moisture content and compaction, so confirm the rate with your supplier before placing a large order.

Is this tool free?

Yes, completely free with no registration. All calculations happen client-side in your browser.

Does it work on mobile?

Yes. The calculator is fully responsive and works on phones and tablets in any modern browser — useful when you are measuring on site.

About the Concrete Calculator

The Concrete Calculator estimates the concrete volume a slab needs from its length, width and thickness, then converts that into cubic yards for ready-mix and into 60 lb and 80 lb bag counts for smaller pours. Enter your measurements and the result updates as you type — there is nothing to submit and nothing to wait for.

Everything runs in your browser. Nothing you enter is sent to a server, there is no sign-up, and there is no usage limit.

Who it's for

Homeowners pouring a patio, shed base or walkway, and contractors sanity-checking an order before the truck arrives.

How the calculation works

volume ft³ = length × width × (thickness ÷ 12); cubic yards = ft³ ÷ 27

The result depends on a few standard constants, which are stated on the page rather than hidden:

  • An 80 lb bag of pre-mixed concrete yields about 0.60 ft³; a 60 lb bag about 0.45 ft³.
  • Bag counts are rounded up — you cannot buy part of a bag.
  • Ready-mix is usually sold in ¼-yard increments, so round the cubic-yard figure up when ordering.

Getting an accurate estimate

Measure twice. Small errors in a linear dimension compound, because material volume scales with two or three of them at once — a 6-inch error across a 20-foot run is over a cubic foot of material on a 4-inch pour.

Keep the waste allowance. The default is deliberately conservative: offcuts, spillage, uneven sub-base and breakage are all real, and running short mid-job usually costs more in a second delivery than the surplus did.

Round up when you order. Suppliers sell in fixed increments — quarter yards, whole bags, full boxes — so treat the figure here as the minimum you need rather than the exact amount to buy.